» » » » Feelgood Super High Gloss Sealer

Feelgood Super High Gloss Sealer

$29.99

Categories: ,

Description

FEELGOOD SUPER HIGH GLOSS SEALER

Professional 2-Part High Gloss Clear Coat System

🔥 PRE-ORDER NOW AVAILABLE!

The wait is over! Pre-orders are officially open!

📦 Estimated Shipping Date: October 30, 2026

Reserve your Feelgood Super High Gloss Sealer today!

THE FINISH YOUR CUSTOMS DESERVE.

Feelgood Super High Gloss Sealer locks in your custom work and delivers an incredible wet-look shine that’s hard to match.

It’s the perfect high gloss sealer for patent leather-inspired custom projects like Jordan 11s.

Built for projects that demand a mirror-like shine — full custom colorways, metallic finishes, and statement pieces — without sacrificing toughness.

WHAT IT GIVES YOU

* Deep, wet-look high gloss shine
* Durability and strength
* Scratch resistance
* Flexible, non-cracking finish when properly applied

WHAT’S INCLUDED

PART A — 4 OZ | CLEAR COAT RESIN

PART B — 4 OZ | ACTIVATOR

TOTAL: 8 OZ

Both bottles feature precision-tip applicators and removable red inner sealing plugs.

HOW IT WORKS

Feelgood Super High Gloss Sealer is a professional two-part coating system.

Simply combine equal amounts of Part A and Part B (1:1 mixing ratio), mix thoroughly, and apply.

For best results, follow the application instructions below.

⸻

APPLICATION INSTRUCTIONS

STEP 1 — PREP

Work in small batches. Once Part A and Part B are combined, the sealer has a limited working time.

Thoroughly clean the surface, removing all dirt, dust, oils, and debris.

Anything left behind may become permanently sealed beneath the clear coat.

Work in a clean, dust-free environment with appropriate ventilation.

STEP 2 — MIX

1. Measure equal amounts of Part A and Part B.
2. Combine in a clean mixing container.
3. Mix thoroughly until both components are evenly combined.
4. Prepare only the amount needed for your application.

Mixing Ratio: 1:1 (Part A + Part B)

Example: 15 drops of Part A + 15 drops of Part B.

For consistent results, use accurately measured quantities rather than relying solely on drop counts.

IMPORTANT: Never introduce mixed material back into either original bottle.

STEP 3 — APPLY

Airbrush Application — Recommended for Professional Use

Airbrushing provides a smooth, even application and helps achieve the desired high-gloss finish.

Spray only in a properly equipped, ventilated spray area using appropriate respiratory protection and ignition-controlled equipment.

Hand-Brush Application

Hand painting is also an option for smaller projects and detailed applications.

COAT 1: Apply a light, even layer. Allow approximately 5–10 minutes between coats.

COAT 2: Apply another light, even layer. Allow approximately 5–10 minutes.

COATS 3–4: Gradually build the gloss with additional controlled coats.

Avoid oversaturating the surface.

Heavy puddles indicate excessive application and can result in an uneven finish.

The clear coat is self-leveling, allowing the finish to smooth out as it settles.

Coating intervals and cure times can vary with application conditions. Allow adequate drying and curing before handling.

STEP 4 — FINISH

Thoroughly clean your airbrush or paintbrush immediately after use.

If material begins hardening inside your equipment, stop application and clean it using an appropriate cleaning method.

FIRST TIME USING THE SEALER?

Practice on a small, hidden section of the shoe before applying it to the entire project.

Allow the finished coating to cure completely before wearing or handling the sneakers.

⸻

STORAGE & HANDLING

BEFORE USE

1. Unscrew the precision-tip spout from the bottle.
2. Carefully remove the red inner sealing plug.
3. DO NOT DISCARD THE RED INNER SEAL.
4. Dispense the desired amount of product.
5. Keep Part A and Part B separate until ready to mix.

AFTER USE

1. Reinsert the original red inner sealing plug firmly into the bottle opening.
2. Securely screw the precision-tip spout back onto the bottle.
3. Ensure both components are tightly sealed.
4. Store bottles upright in a cool, dry location.

⚠️ IMPORTANT — PREVENT CROSS-CONTAMINATION

NEVER INTERCHANGE CAPS, SPOUTS, OR RED INNER SEALING PLUGS BETWEEN PART A AND PART B.

Each bottle must retain its original cap, spout, and sealing plug.

Accidentally transferring material between bottles can cause premature chemical reactions, hardening, or product contamination.

ALWAYS RESEAL BOTH BOTTLES IMMEDIATELY AFTER USE.

RECOMMENDED STORAGE

Temperature: 65–80°F (18–27°C)

Store in a cool, dry, well-ventilated location.

Keep away from excessive heat, direct sunlight, sparks, open flames, and other ignition sources.

Protect from freezing.

Keep containers tightly sealed when not in use.

⸻

⚠️ IMPORTANT SAFETY PRECAUTIONS

FOR PROFESSIONAL USE ONLY

Feelgood Super High Gloss Sealer is intended for experienced professionals familiar with two-component solvent-based coatings.

USE ONLY IN A PROPERLY VENTILATED AREA.

FLAMMABLE — KEEP AWAY FROM HEAT, SPARKS, AND OPEN FLAMES.

* Avoid breathing vapors, mist, or spray.
* Wear chemical-resistant gloves and protective eyewear.
* Use appropriate protective clothing.
* Use respiratory protection appropriate to the exposure conditions.
* Spray application may require a properly selected supplied-air respirator and suitable spray ventilation.
* Standard dust masks and N95 respirators do not protect against solvent vapors.
* Avoid contact with skin and eyes.
* Keep out of reach of children.
* Read all bottle warnings and instructions before use.

IMPORTANT RESPIRATORY WARNING: This two-component coating presents serious inhalation hazards, including potential respiratory sensitization. Spray application requires appropriate professional exposure controls.

⸻

PERFECT FOR

* Custom sneakers
* Jordan 11 patent leather-inspired projects
* High-gloss custom colorways
* Metallic and specialty finishes
* Professional sneaker customization
* Projects requiring a deep, wet-look finish

⸻

QUESTIONS?

We’re always happy to help!

Feelgood Threads
đź“§ info@shopfeelgood.com

DISCLAIMER

Feelgood Super High Gloss Sealer is intended for professional use.

Users are responsible for proper preparation, mixing, application, ventilation, personal protective equipment, and safe handling.

Improper use may cause personal injury, property damage, or unsatisfactory results.

Feelgood Threads is not responsible for damage resulting from improper application or failure to follow product instructions, to the extent permitted by applicable law.

Reviews

There are no reviews yet.

Be the first to review “Feelgood Super High Gloss Sealer”

Your email address will not be published. Required fields are marked *